startek-fm220u-optical-finger-print-scanner-stqc-sertified-500x500

Startek FM220U Optical Finger Print Scanner, STQC Sertified

Startek FM220U Optical Finger Print scanner is UIDAI – STQC certified, and can be used in all projects asking for STQC certified scanners.
Used for:

  • NDLM
  • Jeevan Pramaan
  • Aadhaar Enabled Biometric Attendance System (AEBAS)
  • VTP

Overview

FM220U is a CMOS-based optical reader with high-quality. It can capture images and verify fingerprints with high speed. FM-220U has used in enrollment and attendance verification applications as a stand-alone or embedded device.

Features• ISO compliant
• Low image distortion – Startek’s FM220U is less than 1%.
• Fast scanning & matching speed
• Choice to set different security levels for different application FRR/FAR demand
• Non-distorted image quality
• Small template size
• Real-life applications – no problem in verifying smeared, scarred, stained and smudged fingers
• Support verification on various server platforms
Applications

• Verification for Welfare Distribution (financial empowerment for below poverty level or rural poor)
• Retail or Banking POS
• Workforce/School attendance and welfare management
• Internet Service Provider (ISP) Logon and Logical access control
• Foreign labor management
• E-shopping/procurement/clinic
• E-banking
• E-workflow/ERP (Enterprise Resource Planning)
• Voting Verification
• Club member verification specifications

Seneors CMOS sensor
Scanning 1/15 second
Image resolution 500 dpi (H),500 dpi(V) (600dpi optional)
Image capture format 13.3 x 16.4(mm) (H * V)
Scanner output image size 264 * 324 pixels(H * V)
Gray Level 8bits/pixel,max 256 gray scales
Image ratio of length to width 1 : 1
Scanner interface cable Standard USB compliant cable
Power supply 1 watt approx(from USB port)(200mA,approx,standby:60mA)
Minimum hardware requirement P3 800MHz CPU or up,256MB,USB2.0
Dimension 80mm (L) x 41mm(M) x 40mm(H)
Weight 100g(Approx)
Distortion <1%
Temperature(without external enclosure) 0°C~50°C
Humidity 90% non condensing
Scanning light source infrared red (940nm)
Operating volts 5V Tolerance 5% (USB connector)
ESD 15KV